103
• External Forward Only (This setting means that ONLY
incoming external calls can be Forwarded externally)
WARNING
It is possible that an extension may misuse the External Forward
facility. The Default setting is that no extension is allowed to set
the facility.
Do Not Disturb
If your extension is set to ‘Do Not Disturb’, anyone trying to call you
will receive a busy (engaged) tone. If the person trying to contact
you has a Featurephone, ‘Do Not Disturb Enabled’ will appear on its
'display'. ‘Call Back’ and ‘Alarm call’ are the only incoming ringing
that will be accepted when this feature is set.
Extensions may be set not to ring.
This option cannot be set for extension 20.
Lock Code
You use a Lock Password to lock, unlock, or to make calls from a
locked extension. The default Lock Password for all extensions is
321, but each extension may change its password. Extension Lock
Passwords can be examined from the Programming Extension.
The allowable range is a three-digit code in the range 000 to 999.
Lock
This feature allows you to lock your extension to prevent
unauthorized users from making external calls. Turn extension lock
ON or OFF.
Sys Sped Dial override
When this option is On extensions can dial all the numbers in the
system speed dial list even if they are normally restricted from
dialing that number.
Forward All
Before you leave your extension, you can Forward all your calls to
ring at another extension. Alternatively, you can Forward all
external calls presented to your extension to an external number.
This function can be set for all extensions
Left mouse click on the data entry field for each extension. Enter up
to 24 digits in this field (include the trunk access digit of Forwarding
to outside lines).
Note
Note: Extension forwarding only applies to calls specifically to that
extension. So, or example, calls routed to the extension as part of
a general Incoming Ringing group will not be subjected to
individual extension level Forwards.
Forward when busy
The ‘Forward when busy’ feature allows you to Forward all your
calls to ring at another extension if your extension is busy
(engaged). Alternatively, you can Forward all external calls to an
external number if your extension is busy. In this case, internal calls
will not be Forwarded but will be given the busy tone.
This function can be set for all extensions
To Next Page
Loading...
