Mitel 1000 - Programming Additional System Options

176
Press the Scroll Down Key (Ô) until ‘Timers’ is displayed.
Select ‘Timers’.
Select ‘Answering Machine Delay ’
Enter the time. The default is 010 seconds.
Press the Speakerphone Key to finish programming.
Programming Additional System Options
Doorphone
To set up a Doorphone on your System
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key (Ô) until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘System’.
Select ‘Doorphone'.
Select ‘Doorphone equipped’.
Press the Speakerphone Key to finish programming.
To program which extensions can operate the Doorstrike
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key (Ô) until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘Extensions’.
Press the Scroll Down Key (Ô) until ‘Open door restriction’ is
displayed.
Select ‘Open door restriction’.
Select which extensions are restricted from opening the door. The
extensions restricted from operating the Doorstrike will be indicated
with a ♦.
Press the Speakerphone Key to finish programming.
External Forwarding Options
This allows you to decide if External callers or External and internal
Callers to your extension are Forwarded externally if you have set
an external Forward. It also allows extensions to be prohibited from
activating an external forwarding.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key (Ô) until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘Extensions’.
Press the Scroll Down Key (Ô) until ‘External Forwarding' is
displayed.
Select 'External forwarding'.
Select ‘No trunk to trunk calls’.