177
Select the extensions that are not allowed to activate an external
forwarding or set up trunk to trunk calls.
If both internal and external calls are to be Forwarded select 'All
calls'.
If external calls only are to be Forwarded select 'External calls only'
Miscellaneous system configuration options
To change the system Language
The text prompts can be presented in English, French or Spanish.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key (Ô) until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘System’.
Select ‘Language’.
Choose English, French or Spanish.
Note
Each extension can choose their own language if they wish it to
be different from the language selected here.
To change the Programming Extension
System programming can only be carried out at one Featurephone,
that is, the Featurephone connected to the Programming Extension.
By default, extension 20 is the Programming Extension. The
Programming Extension can be changed to any other extension if
required.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key (Ô) until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘System’.
Select ‘Programming position’.
Select the extension you wish to have as the Programming
Extension. The selected Programming Extension is denoted by a ♦.
Press the Speakerphone Key to finish programming.
To change the System Programming Password
The default System Programming Password (1111) can be
changed to any 4-digit number.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key (Ô) until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘System’.
Select ‘Change password’.
Select ‘Change’ and enter the 4-digit number you require.
Select ‘Confirm’.
Press the Speakerphone Key to finish programming.
To Next Page
Loading...
