49
Using a Standard or cordless Telephone
Feature Access Code List
You may access the range of Mitel 1000 features with a standard or cordless
telephone. To use a feature, dial the appropriate code from the list below.
If your telephone is equipped with memory keys you may program feature
codes onto the keys - refer to your telephone user guide for instructions. On
the cordless phone you can program codes under the Services (SER) key.
See Page 188.
Feature Code Feature Code
Answering machine on/off 737 Line Forward All Calls 792
Alarm Call 718 Line Forward when busy 793
Alarm Call cancel 718* Line Forward on No Answer 794
Barge –In 709 Internal Call Waiting Hookflash 8
Call Pick-up 727 Night Service 738
Call Recording Hookflash 795 Open the Door 731
Call Waiting Tone Protection 725 (Hookflash 725) Page – Featurephone 716
Conference Hookflash 3 Park Hookflash 712
Forward All 732 xx Pick up parked call 712
Forward when busy 733 xx Redial 77
Forward on No Answer 734 xx Redial IP call over standard line Hookflash 77
Do Not Disturb – set/cancel (Not available to
extension 20)
736 Reset telephone 739
Door Open 731 (Hookflash 731) Return to call placed on systemhold 719
Extensions - Wired 20-23 Return and hold in Two Call handling Hookflash 2
Extensions - Cordless 31-34 Return and release in Two Call handling Hookflash 1
Extension 20 0 Ring Back Hookflash 5
Extension Lock – change code
714 xxx Saved Number Redial 781-785
Extension Lock - lock/unlock 713 xxx Speed Dial – accessing personal numbers 74(01 -30)
External Call Hold Hookflash Speed Dial – accessing system numbers 400-499
Follow Me 735 (Password) xx Speed Dial – programming personal
numbers
75(01 -30)
Forward Recall Hookflash 722 Voice call (to page an individual
Featurephone)
715
Line Access – CO lines 9 Voice Mail Access
*
Line Access – IP Trunks 8 Voice Mailbox number 710
To Next Page
Loading...
