22
4 Basic programming using the Management
Application
The Mitel 1000 includes a series of Web management pages that
provide an interface to the software installed on the Mitel 1000. It
enables you to configure the Mitel 1000. You can access it through
your web browser from any PC connected to the Mitel 1000 via
the
wired or wireless LAN.
Note
By default the Wireless network card in the Mitel 1000 is disabled.
This is as a security measure to prevent unauthorized access to
the Mitel 1000. To turn the Wireless network on, see Page 122.
Open a Web Browser such as Internet Explorer or similar on the PC.
Go to the Management Application of your Mitel 1000 by entering the
following address into the web browser, http://192.168.1.1
The following Log In screen is displayed
To Next Page
Loading...
