Mitel 1000 - ADSL and PC Settings Troubleshooting

207
(2) Check your ADSL settings
(a) Enter the Mitel 1000 Main menu
• Select Router Configuration
• Select ADSL Modem
click Change the ADSL Modem settings here …
• Select PPPoA
click Next
• Enter PPP Username, PPP Password, retype password
click Next
• Select Manual
enter VPI = 0, VCI = 35
click Next
• Click Confirm Changes
Yes
Go to (c)
(b) Is the Internet
LED on the Mitel
1000 front panel
Green?
No The LED is Red
Contact your ADSL service provider and
confirm that your PPP Username and
Password are correct.
(c) Can you browse?
No
Go to (3) Check your PC settings.
(3) Check your PC settings
Configuring the PC settings for Windows XP are described below. For
other operating systems, refer to Appendix D, Configuring your PCs.
• Click start
• Click Control Panel
• Double click Network Connections icon
• Double click Local Area Connection
• Under General tab
click Properties
• Under General tab
scroll down and highlight Internet Protocol (TCP/IP)
click Properties
• Under General tab
select Obtain an IP address automatically
select Obtain DNS server address automatically
click OK