209
(5) Check your Wireless PC settings
The following procedure is for a PC with an Intel (PRO) Wireless
Network adapter that has been set up for WPA security.
For other Wireless Network adapters, consult the manufacturer’s user
manual. Note that some older wireless adapters do not support WPA.
• Click start
• Click Control Panel
• Double click Network Connections icon
• Double click Wireless Network Connection
• Under General tab
click Properties
• Select Wireless Network tab
highlight the network name noted in (4c)
click Properties
• Under Association tab
set Network Association to WPA-PSK
set Data Encryption to TKIP
re-enter the Network Key (this is the Pass Phrase noted in (4f))
confirm the Network Key
click OK
To Next Page
Loading...
