66
The user can set up remote notification to notify them of all new messages or
only those marked as priority by callers to their voice mail.
Remote notification can be turned on and off as required.
If the call is to a personal number the user can access their voice mail when
they answer the call by entering their voice mail password and pressing #.
Setting Up your Remote Notification to a Personal Number
You must first program the personal that the system is to call when a new
message is received. Then select whether all messages or messages marked
as priority are notified. Finally you turn remote notification on.
Programming a Personal Number
Press the MESSAGE key.
Enter your extension number (which is your voice mailbox number).
Enter your voice mail password (1111 by default) followed by #.
Select “Remote Notification”.
Select “Programming”.
Select “Personal Number”.
Select “Change”.
Enter the number.
From a standard or cordless telephone dial 4311 followed by the number to
program a personal number.
Notification of All Messages or Priority messages
Press the MESSAGE key.
Enter your extension number (which is your voice mailbox number).
Enter your voice mail password (1111 by default) followed by #.
Select “Remote Notification”.
Select “Programming”.
Select “Priority Messages Only” or “All Messages”.
From a standard or cordless phone dial 433 for priority messages and 434 for
all messages.
Turning Remote Notification on and off
Press the MESSAGE key.
Enter your extension number (which is your voice mailbox number).
Enter your voice mail password (1111 by default) followed by #.
Select “Remote Notification”.
Turn remote notification on or off as required.
From a standard or cordless phone dial 41 to turn remote notification on and
dial 42 to turn it off.
Setting up Remote Notification to a Pager
To program a pager to receive the remote notification call two numbers must
be programmed, the number to contact the pager company and the digits that
are sent to the pager company once they have answered the call (dial string).
Programming the pager number and the pager dial string
Press the MESSAGE key.
Enter your extension number (which is your voice mailbox number).
Enter your voice mail password (1111 by default) followed by #.
Select “Remote Notification”.
Select “Programming”.
Select “Pager Number”.
Select “Change”.
Enter the number.
Press “Confirm”.
To Next Page
Loading...
