78
The settings are shown. If you are happy with them press Confirm Changes.
Configuring a Manual Internet Connection – RFC 1483
If your ISP tells you to configure your Internet access manually, they must
provide you with the following information:
The WAN IP address and subnet mask for your Mitel 1000
The Internet Gateway address
The primary and secondary DNS addresses
Note
You should only change the Internet Access details if your ISP
asks you to, or if you are familiar with network configuration. In
most cases, you will not need to make any changes to this
configuration.
1. From the ADSL Modem: Types of Access page Select Manual then click
Next>.
2.The following page is displayed: Click in each box and type the relevant
address information provided by your ISP. Click Next>.
To Next Page
Loading...
