Mitel 6865i - Page 152

Mitel 6865i SIP Phone Release 4.1.0 User Guide
150
12. When the phone receives an incoming call, and call forward is configured on the phone,
the phone rings the number of times you specify in the No. Rings screen, and then forwards
the call if there is no answer.
13. Press
4Set to save the change.
14. Press
3Done to save all your changes.
15. Each time you press
3 Done, the following screen displays.
16. Press # Confirm to confirm the change(s) each time the Apply Changes screen displays.
All changes are saved to the phone.
CFWD in Phone Mode
1. Use the 3 and 4 navigation keys to scroll through each account.
In the above example, account 1 and account 2 are the accounts configured on the phone.
Both accounts have CFWD enabled as indicated by the CFWD All message.
2. Press the Call Forward key. The Call Forward menu displays. Use the 2 and 5 navigation
keys to scroll through each state type.
IP PHONE UI
Note: In Phone mode, when you change the call forward configuration for an account,
the change applies to all accounts.
Apply Changes
0Cancel
#Confirm
John Smith
CFWD All
Tue Aug 20 2:55pm
L1
J. Smith
CFWD All
Tue Aug 20 2:55pm
L2
Cfwd Mode
1. All
Done Change

Cfwd Mode
2. Busy !
Done Change
Cfwd Mode
3. No Answer X
Done Change
Cfwd Mode
4. All Off
Done Change
Cfwd Mode
5. All On
Done Change
Indicates
Indicates
CFWD Enabled
CFWD Disabled
Indicates
no CFWD
phone number
configured