Mitel 6865i - LOCAL CONFERENCING; CENTRALIZED CONFERENCING (FOR SYLANTRO AND BROADSOFT CALL MANAGERS)

Mitel 6865i SIP Phone Release 4.1.0 User Guide
126
Joining Additional Parties to Active Conferences
In centralized conferencing, you can join multiple incoming or outgoing calls to active
conferences. Before following this procedure, at least one active conference must exist on your
phone.
1. As Party 1, pickup the handset or press the key.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding
them to the conference.
4. Press the key.
5. Press the Line key that has the active conference.
6. Press the key again to join the parties to the active conference.
ENDING A CONFERENCE AND TRANSFERRING REMAINING PARTIES
The 6865i allows a host to drop from a 3-way conference and let the other two parties remain
connected. If you are the host of a conference and want to leave that conference press the
3
Leave key on the phone. Your phone leaves the 3-way conference but the remaining parties
are still connected to the conference.
ENDING CALLS
To end a call, you first need to connect or reconnect to the call if not already connected (for example,
if your caller is on hold). Press to end the call. If connected through the handset, you
can also place the handset back on hook to end the call.
IP PHONE UI
Note: The Caller ID of the dropped host still displays on the remaining parties’ phones.
IP PHONE UI