Mitel 6865i SIP Phone Release 4.1.0 User Guide
SPEEDDIAL/XFER
The Speeddial key allows a number to be dialed quickly by pressing one key configured for
speed dialing. The Transfer key allows a call to be transferred to other recipients blindly or
consultatively. The Speeddial/Xfer key combines the Speed dial and Transfer key's
functionality together allowing the user to transfer calls or use speed dial with one key.
SPEEDDIAL/XFER KEY REQUIREMENTS AND FUNCTIONALITY
The Speed Dial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed
Dial/Xfer key causes the phone to go offhook and dial the predefined extension.
• Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the
Speed Dial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the call
(get the call back) by pressing the line key again.
• Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the
Speed Dial/Xfer key forwards the call to the predefined extension.
CONFIGURING A SPEEDDIAL/XFER KEY
1. Click on Operation > Programmable Keys.
or
Click on Operation > Expansion Module <N>.
Programmable Keys
2. Select from Key 1 through Key 8.
3. In the Type field, select Speeddial/Xfer.
Note: It is recommended that you enable the Switch UI Focus to Ringing Line parameter
when using the Speeddial/Xfer feature. For more information about this parameter, see
“Switch UI Focus to Ringing Line” on page 162.
MITEL WEB UI
To Next Page
Loading...
