BACKLIGHT
The Backlight option on the IP phone allows you to set the backlight status on the LCD display
to the following:
• Off: Backlight is always off.
• Auto (default): Automatically turns on the backlight when the phone is in use, and then
automatically turns off the backlight when the phone is idle after a specified length of time.
Configuring Backlight Options
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Display.
4. Select Backlight.
5. Use the 5 or 2
navigation keys to navigate to Off or Auto.
6. Press the key or select 4Set to save your selection.
LIVE DIALPAD*
The Live Dialpad option on the IP phone turns the live dialpad mode on or off. With the live
dialpad feature enabled, the 6865i IP phone automatically dials out and turns on handsfree
mode as soon as a dialpad/keypad key or programmable key is pressed. With live dialpad
disabled, if you dial a number while the phone is on-hook, lifting the receiver or pressing the
initiates a call to that number.
You can enable/disable the live dialpad using the IP phone UI only.
ENABLING/DISABLING LIVE DIALPAD
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Live Dialpad.
4. Use the 5 and 2
navigation keys to navigate to ON or OFF.
5. Press the key or select 4Set to save your selection.
IP PHONE UI
Note: Availability of this feature is dependant on your phone system or service provider.
IP PHONE UI
To Next Page
Loading...
