Mitel 6865i - Idle Screens

Mitel 6865i SIP Phone Release 4.1.0 User Guide
14
When the configuration update is complete, the phone displays the following screens:
IDLE SCREENS
When the phone has successfully updated the configuration and connected to the network, the
phone displays the Idle State screen:
The Idle State screen lists your name (SIP screen name), extension (or phone number), and
the date and time. This screen is shown whenever your phone is not in use. The L1 in the upper
corner in the above example indicates the idle screen for the first line appearance. You can
use the left and right arrow keys to scroll through the idle screens for both line appearances
on the 6865i.
The second display line shows the following temporary messages if the event occurs:
•No Service
• DHCP Failed
•Restarting
• New IP Obtained
• Network Disconnected/Connected
The second line can also display the following status messages, listed in order of display priority:
Note: Since Network Disconnected/Connected displays on two lines, the date and time
does not show if this event displays.
Network
DSP
SIP
Done
John Smith
9055550055
Tue Aug 20 2:55pm
L1