Mitel 6865i - PARK;PICKUP KEYS

Line Keys and Programmable Keys
81
PARK/PICKUP KEYS
The 6865i phone has a park and pickup call feature that allows you to park a call and pickup
a call when required. The IP phones support the Park/Pickup feature on the Asterisk,
BroadWorks, Sylantro, and ININ call managers.
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable Park key
to park the call
• After the call is parked, you can press the Pickup key, followed by the applicable value to
pickup the call
Administrators can configure the Park and Pickup keys for any line using the configuration
files or the Mitel Web UI.
CONFIGURING PARK/PICKUP KEYS
1. Click on Operation > Programmable Keys.
or
Click on Operation > Expansion Module <N>.
Programmable Keys
2. Select from Key 1 through Key 8.
3. In the Type field, select Park.
4. Select from Key 1 through Key 8.
5. In the Type field, select Pickup.
MITEL WEB UI
Note: The Value field should be configured by the Administrator.
Note: The Value field should be configured by the Administrator.