Mitel 6865i - SET AUDIO

Mitel 6865i SIP Phone Release 4.1.0 User Guide
34
SET AUDIO
The Set Audio option on the IP phone allows you to set the audio mode for your IP phone. It
also allows you to set the volume level of the headset microphone and enable/disable DHSG.
You can configure audio options on your IP phone using the IP phone UI only.
AUDIO MODE
The 6865i allows you to use a handset, a headset, or handsfree mode to handle incoming and
outgoing calls. The Audio Mode option provides different combinations of these three methods
to provide maximum flexibility in handling calls. There are four audio mode options you can set:
Setting Audio Mode
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Set Audio.
4. Select Audio Mode.
5. Select the audio mode you want to use on your phone. Valid values are:
• Speaker (Default)
• Headset
• Speaker/Headset
• Headset/Speaker
6. Press the key or select 4Set to save your selection.
AUDIO MODE OPTION DESCRIPTION
Speaker This is the default setting. Calls can be made or received using the
handset or handsfree speakerphone. In handset audio mode, pressing the
button on the phone switches to handsfree speakerphone. In
Speaker audio mode, lift the handset to switch to the handset.
Headset Choose this setting if you want to make or receive all calls using a handset
or headset. Calls can be switched from the handset to headset by
pressing the button on the phone. To switch from the headset to the
handset, lift the handset.
Speaker/Headset Incoming calls are sent to the handsfree speakerphone first when the
button is pressed. By pressing the button again, you can switch
back and forth between the handsfree speakerphone and the headset. At
anytime, lifting the handset switches back to the handset from either the
handsfree speakerphone or the headset.
Headset/Speaker Incoming calls are sent to the headset first when the button is
pressed. By pressing the button again, you can switch back and forth
between the headset and the handsfree speakerphone. At anytime, lifting
the handset switches back to the handset from either the headset or the
handsfree speakerphone.
IP PHONE UI