Line Keys and Programmable Keys
4. In the Value field, enter the speed dial extension or the extension to transfer calls to (for
example, 5551212).
5. In the Line field, select the line for which you want to use the key functionality.
6. Click Save Settings.
Expansion Module Keys
7. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
8. In the Type field, select Speed Dial/Xfer.
9. In the Value field, enter the speed dial extension or the extension to transfer calls to (for
example, 3600).
10. In the Line field, select the line for which you want to use the key functionality.
Valid values are:
• global
• 1 through 24
11. Click Save Settings.
SPEEDDIAL/CONF
The 6865i allows you to configure a programmable key to be used as a speed dial conference
key (Speeddial/Conf key) while remaining in the current call. This key allows a user on a call
to conference another party at a predefined number while remaining in the call.
For example, while on an active call, a user can use the Speeddial/Conf key to dial a recording
service and have the resulting conference recorded.
If you configure a programmable key as a Speeddial/Conf key and you press this key while
on an active call, the focused line changes to the dialing line. The active call is not put on hold
when the speed dial number is dialed.
Note: If currently in a conference, the Speeddial/Conf key is disabled on the active call.
Note: This feature is not compatible with centralized conferencing.
To Next Page
Loading...
