Mitel 6865i SIP Phone Release 4.1.0 User Guide
LAST CALL RETURN KEY
Using the Mitel Web UI, you can configure the Last Call Return function on a key. If you configure
Last Call Return on a key, and a call comes into your phone, after you are finished with the call
and hang up, you can press the key configured for Last Call Return and the phone dials the
last call you received. When the Sylantro call manager detects an Last Call Return request, it
translates this request and routes the call to the last caller.
CONFIGURING A LAST CALL RETURN KEY
1. Click on Operation > Programmable Keys.
or
Click on Operation > Expansion Module <N>.
Programmable Keys
2. Select from Key 1 through Key 8.
3. In the Type field, select Last Call Return.
4. In the Line field, select the line to apply this feature.
Valid values are 1 through 24.
5. Click Save Settings.
Expansion Module Keys
6. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
7. In the Type field, select Last Call Return.
8. In the Line field, select the line you want to apply to this key.
Valid values are 1 through 24.
9. Click Save Settings.
MITEL WEB UI
To Next Page
Loading...
