Mitel 6865i - Page 84

Mitel 6865i SIP Phone Release 4.1.0 User Guide
82
6. Click Save Settings.
7. Click on Reset, then click Restart to restart the IP phone and apply the changes.
Expansion Module Keys
8. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
9. In the Type field, select Park.
10. In the Value field, enter the appropriate value for accessing specific services from the
server.
11. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
12. In the Type field, select Pickup.
13. In the Value field, enter the appropriate value for accessing specific services from the
server.
14. Click Save Settings.
15. Click on Reset, then click Restart to restart the IP phone and apply the changes.
USING THE PARK CALL/PICKUP PARKED CALL FEATURE
Use the following procedure on the IP phone to park a call and pick up a parked call.
Parking a Call
1. While on a live call, press the Park key.
2. Perform the following for your specific server:
If the call is parked successfully, the response is either a greeting voice confirming that the call
was parked, or a hang up occurs. The parked call party hears music on hold.
Note: The Value and Line fields are configured by the Administrator.
Note: The Value and Line fields are configured by the Administrator.
ASTERISK
Server announces the extension number where the call has been parked. Once the call is parked, press
the key to complete parking.
BROADWORKS
After you hear the greeting from the CallPark server, enter the extension where you want to park the
call.
SYLANTRO
Enter the extension number where you want to park the call, followed by # key.
ININ
Enter the extension number where you want to park the call, followed by # key.