Displays, softkeys, LEDs and key functions
15
DISPLAY
Information on the current connection status or lists and text of the menu are shown on the
display. In the idle status you will see:
• system name with internal call number
• your programmed user name
• current time and date
• any set alarm clock and/or appointment
• any activated features
• the activated profile
• symbols for programmed functions
SOFTKEY LINE AND IDLE DISPLAY
The three keys below the display are called softkeys. The functions assigned to these keys are
shown in the bottom display line. The key function changes automatically according to the
operating state of the handset.
When the handset is delivered the following symbols are shown in the softkey line:
These functions are also assigned to the navigation keys.
: Use this option to access the main phone menu.
LED
The LED (3-colour/red-orange-green) in the upper corner signals specific events. These events
are required by the system and cannot be changed or turned on/off (see “Settings menu” on
page 54).
Enables selection from a list.
Navigation keys: used to call up a selection list with frequently used features.
Enables the SIP-DECT user to log in.
Top navigation key Phone book on the system (if applicable) or handset
Bottom navigation key Handset phone book (personal phone book)
Left navigation key Information lists (call list, voice box*, redial) or the programmed function
Right navigation key Profiles or the programmed function
Note: The functions of the left and middle softkeys and of the left/right navigation keys
are programmable and therefore may subsequently be assigned to different functions.
COLOUR STATUS DESCRIPTION SWITCH ON/OFF?
To Next Page
Loading...
