Mitel 700 - USING THE BLUETOOTH HEADSET (NOT MITEL 712 DT); REGISTERING THE BLUETOOTH HEADSET; UNREGISTERING; RENAMING THE BLUETOOTH HEADSET

Mitel 700 DECT Phone User Guide
26
1. Open the appropriate list (e.g. in the Info menu) with the left navigation key.
2. Press ••• to access the Options menu. The following options are available
• Dial number: The previously selected entry is immediately called.
• Predial: The previously selected entry is transferred to the predial for calling.
• Add to: The call number of the entry is transferred into your personal phone book, the
call filter or the VIP list.
• Details: Further information on the entry is displayed.
• Delete: Deletes the entry.
• Delete all: Deletes the entire list.
Edit system lists
The system’s redial list and caller list offers the following options:
• Press the C key briefly: Deletes the selected entry.
• Press and hold the C key: Deletes the list.
• Press Ok: Displays details about the entry.
USING THE BLUETOOTH® HEADSET (NOT MITEL 712DT)
The Bluetooth feature of the DECT phones allows registration of two Bluetooth headsets, one
of which can be selected for use.
A registered and accessible Bluetooth headset ( symbol) has priority over any other headset
also connected via cable ( symbol).
If the hands-free operation key is pressed when a headset is being used (Bluetooth or connected
via cable), the call is forwarded to the DECT phone loudspeaker.
If the connection between the DECT phone and Bluetooth headset is lost during a call, a message
appears on the display. You can decide whether you want to continue the call with a headset
connected via cable if necessary, or on the DECT phone itself, or to terminate the call.
REGISTERING THE BLUETOOTH HEADSET
1. Switch the headset to “Pairing mode”. Follow the instructions in the headset’s user manual.
2. Turn on the function in the ••• > Settings > Bluetooth > BT Status menu.
3. Open the ••• > Settings > Bluetooth > Subscribe headset menu and press the New softkey.
4. The name of the headset that is found is shown on the display. Confirm selection by pressing
Ok and enter the PIN of the headset.
The headset is now logged in and the symbol appears on the top line of the display.
5. Optionally, specify the active headset in the Menu ••• > Settings > Bluetooth > Select
headset.
UNREGISTERING / RENAMING THE BLUETOOTH HEADSET
1. Open the ••• > Settings > Bluetooth > Subscribe headset > [Headset name] menu.
2. Select the Delete/Edit entry.