Mitel 700 - DEVICE MENU; MENU STRUCTURE; OVERVIEW; INFO

Mitel 700 DECT Phone User Guide
40
DEVICE MENU
You can access the DECT phone menu in the following ways:
• With the DECT phone in Idle mode, press •••.
• With the DECT phone in Idle mode, press and select Menu.
Notes about the display symbols in the menu
MENU STRUCTURE
The following sections describe the device features in the sequence they are displayed in the
DECT phone menu. On the Mitel 712dt, 722dt, 732d, and 742d this applies to the set Standard
menu structure. Different arrangements of the menu items can also be set for these devices.
If you have set a different menu structure (i.e. not Standard), you can use the menu trees shown
in “Menu structure” on page 54 to help you find specific features.
OVERVIEW
INFO
The menu contains access to the caller list and redial list, plus access to the voice box and text
messaging can also (where supported by the system).
Quick access to this information is also possible using the left navigation key or using the
Navigation key (default setting).
APPLICATIONS
These functions can be configured for each PBX. Contact your system administrator for more
information about the functions.
Save
To set parameters in the menu, you must open the appropriate setting with the
Ok
softkey.Save your entry using the Save softkey.
Information
You can display further information about the entries using the Info softkey.
Options
You can open further submenus (e.g. Delete, Edit) with the Options softkey.
Esc You can cancel entries with the Esc
softkey and/or go one step back in the
menu.
Change With the Change
softkey, you can turn features on ( ) or off.
You can display submenus for more feature settings.