Device menu
47
AUDIO MENU
Open the menu, select Audio and press Ok.
Setting option for the display formats of the date and time.
Time format Change the time format (24-hour or 12-hour am/pm)
Date format Change the date format
• dd.mm.yy, e.g. 27.02.15
• mm/dd/yy. e.g. 02/27/15
• yy-mm-dd, e.g. 15-02-27
• dd-mm-yyyy, e.g. 27-Feb-2015
Volume settings
Change the volume at the selected menu item with the left and right navigation keys. Setting
range for the ringer: Off, Increasing, Level 1...10.
You can change the volume of the microphone from the Earpiece, Handsfree, and Corded
headset sub menu by pressing the microphone softkey.
Note: The default settings for the Ringer Loudness ex-factory comply with regulatory
requirements. It is recommended that the default setting be retained.
Earpiece Changes the currently set volume of the earpiece
Handsfree Changes the currently set volume for hands-free operation
Corded headset Changes the currently set volume of a corded headset. Setting does not
apply to the Bluetooth headset.
Internal call Changes the currently set volume for calls from internal subscribers.
External call Changes the currently set volume for external calls.
Unknown number Changes the currently set volume for calls without transmitted caller
number. This setting is not supported by your system.
Callback Changes the currently set volume which you receive as a callback.
Example: You have put a connection on “Hold” but—within a certain
time—not dialed another call number, you will get a callback that
reminds you about the waiting subscriber (see “[System Menu] menu”
on page 53).
Recall Changes the currently set volume for recalls. This setting is not
supported by your system.
VIP call Changes the currently set volume for calls from VIP-call numbers. See
“VIP list (Mitel 712dt)” on page 28 and “
VIP list” on page 45.
Special call Changes the currently set volume for special calls. This setting is not
supported by your system.
SOS call Changes the currently set volume for incoming emergency calls.
Alarm clock Changes the currently set volume for alarm clock signaling.
Appointment Changes the currently set volume for appointment signaling.
Normal message Changes the currently set call volume for normal messages (when
supported by your system).
Urgent message Changes the currently set volume for urgent messages (when
supported by your system).
To Next Page
Loading...
