Mitel 700 - HANDLING CALLS; LOG IN; LOG OUT; ANSWERING A CALL

Mitel 700 DECT Phone User Guide
32
LOG IN / LOG OUT
Several users can share a phone using different call numbers (for instance, in shift operation).
Each user logs in with a password and is then reachable on his call number. Then, at the end of
his shift, for example, he logs out again and the phone becomes available for another user to
log in. Log in / Log is also useful if a phone is in constant use and the battery is running low. In
this instance, phone operations can be maintained by logging into a different DECT phone.
Contact your system administrator for full details on the access codes applicable in each case.
HANDLING CALLS
ANSWERING A CALL
Note: Log in activates any features already enabled for that call number (e.g., voice box
access and call forwarding). When the user logs out, the caller list, redial list and message
lists stored on the DECT phone are deleted to protect private data. The system
administrator can specify whether or not the local phone book should also be deleted.
CAUTION: Do not hold the handset up to your ear in hands-free mode. The volume can
be very loud.
or
Reject
... or
Press the Call key.
Press the Reject key (if supported by the system). The call is rejected, and the caller hears
the busy signal.
The ringer is deactivated, but you can still answer the call.
Press
••• and select one of the following options:
• Accept: The call is answered.
• Reject: The call is rejected, and the caller hears the busy signal.
• Ringer off: The ringer is deactivated, but you can still answer the call.
• Add to: The call number of the caller is transferred to the personal phone book, the call
filter or the VIP list.