Basic functions
27
USING THE BLUETOOTH HEADSET FOR PHONE CALLS
Answering a call:
Press the Connect key on the headset or the green call key on the DECT phone. The symbol
is displayed.
Ending a call:
Press the End key on the headset or the End key on the DECT phone.
Making a call:
Enter the call number on the handset and press the Connect key on the headset or the green
Call key on the DECT phone.
Hands-free operation:
If you press the hands-free key to answer a call or during a call, Bluetooth operation is
interrupted and the DECT phone's loudspeaker and microphone are activated.
Answering a call on the headset:
During a call on the DECT phone: Press the Connect key on the headset.
Transferring a call on the DECT phone:
During a call on the headset: Press ••• and select Transfer BT to handset.
For details about additional headset functions, refer to the headset’s user guide.
SPECIAL KEY (HOTKEY) /VIP LIST (NOT MITEL 712DT)
By default, the special key (hotkey) at the top right of the DECT phone is programmed as a VIP
phone book/VIP list for saving up to six telephone numbers for quick access. You can reprogram
the key to assign a different function to it.
To program your favourite call numbers:
1. Briefly press the hotkey and select <New Entry>.
2. Enter the name and the call number.
To dial favourite call numbers:
1. Briefly press the hotkey, select the desired entry and press the Call key .
Note: If Bluetooth has been programmed on one of the keys, pressing the programmed
key results in the following actions.
• DECT phone in idle state: Displays the Bluetooth menu.
• During a call on the DECT phone: Transfers the connection to the headset or back to
the DECT phone.
• If a Bluetooth connection is interrupted because you have exceeded its operating range,
you can restore the connection by switching the headset off and back on again (when
you are back within range).
To Next Page
Loading...
