Mitel 700 DECT Phone User Guide
62
ADDITIONAL MENUS (SPECIAL APPLICATIONS)
When using the communication system in certain areas, it can be practical to control the various
functions directly from your handset via server / XML interfaces. Additional menu items are as
follows (when available):
• The Applications menu, Server menu, Service-Codes, and the Presence function.
• The transmission and receipt of Text messages and the Locating function are also appli-
cations that must be activated and licensed.
As the applications may be very different, they are usually explained in a separate User's Guide.
Contact your system administrator for more information on the functions.
KEY PROGRAMMING
Your DECT phone supports the assignment of frequently used functions to specific keys.
You can program the left and middle softkey below the display. These programmed keys can
only be used in the idle state.
The three sidekeys (left) and the hotkey (right) (not Mitel 712dt) can be programmed as before.
These programmed keys can be used in the handset’s idle state and call connection state.
A programmed left and right navigation key can also be configured used in the handset’s call
connection state, but only if their programming differs from the factory setting with the setting
Info and Profile.
After you have programmed the keys, the icon for the programmed function is indicated on the
display (does not apply to the Hotkey). You can access the function with a short key-press.
PROGRAMMING (GENERAL)
Press and hold the appropriate key or use the Menu ••• -> Settings -> Key programming (see
“Settings menu” on page 54).
If you press the softkey during key programming, you get the default key of the factory setting.
Press Ok.
The selection available below is dependent on the configuration and DECT phone used.
Note: Some functions can only be displayed in the connected state. For instance, if you
call up the call list, you can browse through it and edit it, but you cannot dial a call number
directly from the list.
No function Key is not assigned.
Directories Key is assigned to access the Personal directory, the Central
directory and the VIP list.
Personal directory Key is assigned to access the phone book.
Central directory Key is assigned to access to the system phone book.
To Next Page
Loading...
