Mitel 700 - MENU NAVIGATION; EXAMPLE: SETTING THE LANGUAGE

Mitel 700 DECT Phone User Guide
18
MENU NAVIGATION
EXAMPLE: SETTING THE LANGUAGE
1. Open the menu. Depending on the configuration of your DECT phone, do one of the following:
• press the softkey,
• briefly press the End key (
) and select the menu item from the list.
2. Use the top and bottom navigation keys to select the Settings entry from the list and press
the Ok softkey or the right navigation key.
3. Use the top and bottom navigation keys to select the Display entry from the list and press
the Ok softkey or the right navigation key.
4. Use the top and bottom navigation keys to select the Language entry from the list and press
the Ok softkey or right the navigation key.
Key short Standby
Editor
Enter * in predial
To switch between upper and lower case
when entering text
long Standby Switch call signal on/off (permanent)
Key short Standby
Editor
Enter # in predial
Character according to table (see “Editors” on
page 20)
long Standby Key lock on
Hotkey (not
712dt)
short Standby Select the programmed function (VIP list -
default setting)
long Standby Program with the desired function
SOS key (not
712dt)
long Standby
Connection
Make an emergency call (call or message,
depending on the programming and the
telephone system)
Top sidekey short Standby, Connection Call up the programmed function or—if
connected—increase the volume (if the key is
not programmed)
long Standby
Connection
Program the key function
Increase volume, if the key is programmed
(save with )
Middle sidekey short Standby, Connection Call up the programmed function
long Standby
Connection
Program the key function
Increase volume, if the key is programmed
(save with )
Bottom sidekey short Standby, Connection Call up the programed function, or—if
connected—reduce the volume (if the key is
not programmed)
long Standby
Connection
Program the key function
Reduce volume, if the key is programmed
(save with )
KEY DURATION STATUS DESCRIPTION