Mitel 700 - FORWARDING CALLS WITHOUT NOTIFICATION

Handling Calls
39
FORWARDING CALLS WITHOUT NOTIFICATION
If you are in an ongoing call and want to forward it to another subscriber without advance
notification, do the following:
During an inquiry call:
Press ••• again and select 3 party.
Note: You can invite additional subscribers into an active conference call. Press R
and call another subscriber. When the call is answered, press ••• and select 3 party.
Conference calls are only possible when enabled by your system.
Press ••• and select Transfer.
Enter the call number and press
Ok.
The other phone is called and you connection is closed.
or ...
/
Press the R key OR the green Call key.
Enter the call number and press
Ok.
The other phone is called.
Press the red End key.
or ...
Press ••• and select Brokering.
Enter the phone number and press or
Ok.
The other phone is called.
Press the red End key.
or ...
Press the R key OR the green Call key.
Press ••• and select a call number from the following lists:
• Central directory
• Personal directory
• Redial list
• Caller list
The other phone is called.
Press the red End key.
If the call is answered, the subscriber who was last called is connected with the
waiting subscriber.