Mitel 700 - Page 46

Mitel 700 DECT Phone User Guide
38
After selecting an entry in the system phone book, dial it by pressing the Ok
softkey. After selecting
an entry in the other lists (by pressing the Info softkey once or several times), dial the entry
by pressing the Call softkey.
If the caller does not answer or is busy, press the R softkey or the green Call key. In the case of
a second connection, the following options are the following options are available:
Press ••• and select Brokering.
The first call is put on hold.
Enter the phone number and press the green Call key or
Ok.
or ...
Press ••• and select a call number from the following lists:
• Central directory
• Personal directory
• Redial list
• Caller list
If you initiated the inquiry call using the R softkey or the green Call key: You can
also access the system directory using the top navigation key and personal
directory using the bottom navigation key.
Close current connection
Press ••• and select Release call.
Press ••• again and select Retrieve.
or ...
Press the R softkey, or the Call key.
Change between connections: Brokering
Press ••• and select Brokering.
or ...
Press the R softkey, or the Call key.
Forward a connection with notification
Press ••• and select Transfer.
or ...
Press the End key.
Initiate a Conference Call