Mitel 700 DECT Phone User Guide
46
SIGNALLING A SET APPOINTMENT
You can use Pause to interrupt the signalling for an expired appointment reminder for 5 minutes.
When you call up an appointment that has been put on Pause (interrupted) you are offered Stop
(to deactivate) and Pause (to maintain the interruption).
SIGNALLING A SET ALARM CLOCK CALL
You can use Pause to interrupt the signalling for an expired alarm call for 5 minutes. When you
call up an alarm-clock call that has been put on Pause (interrupted) the options available are
Stop (to deactivate) and Pause (to maintain the interruption).
Time Show the time set for the appointment.
Change Change the time setting.
Date Show the date set for the appointment.
Change Change the date setting.
Text Show the text entered for the appointment.
Change Change/enter the text (maximum 32 characters).
Note: If the ringer is deactivated, there will be no acoustic signalling to indicate a set
alarm or appointment.
Alarm clock
Shows the list of alarms. Up to three alarm times can be entered and activated.
Status: On/Off
Change
You can choose between Once (at the next
specified time with this value), Daily (repeats daily),
Weekdays (Monday to Friday), Weekend
(Saturday, Sunday) and Off.
Time Show the time set for the alarm.
Change Change the time setting.
Text Show the text entered for the alarm.
Change Change/enter the text (maximum 32 characters).
Note: If the ringer is deactivated, there will be no acoustic signalling to indicate a set alarm
or appointment.
Timer
Lets you set a countdown timer (max. 23 hours / 59 minutes). The time remaining
until the signal occurs (using increasingly loud beep tones) is indicated on the display.
The timer’s ringer cannot be adjusted.
Format setting
To Next Page
Loading...
