Basic functions
25
• If only one destination (private, business, mobile, e-mail or fax) is stored in the phone
book and the menu item Auto quick hook is activated, the entry is dialed directly.
CALLER LIST, REDIAL LIST (LOCAL LIST / SYSTEM LIST)
In addition to the DECT phones, you can also operate corded system phones with your
communication system.
For system phones, the caller list and the redial list are administered by the system and sent to
the devices. The DECT phones have separate lists that are managed on the device. To specify
whether you want to use the local list or the system list (PBX), use the ••• Settings > List access
> Caller list / Redial list > Automatic / Local / PBX menu.
Selecting PBX (or Automatic / PBX) makes sense if your DECT phone is operating in parallel
with corded phones. This ensures that both devices have access to the same list and that any
changes made are visible on both devices.
The differences between the lists are as follows:
Local caller list
• 50 entries
• The caller list includes answered and missed calls (but not if busy) in a single list.
• Entries on the list can be added to other menus (e.g., VIP list).
• If the DECT phone is connected in parallel with a corded system phone:
• A callback from the DECT phone's caller list does not delete the entry from the caller list
of the system phone.
• A callback from the caller list of the system phone does not delete the entry on the DECT
phone’s caller list.
• The list displays the names of callers transmitted from the outside.
System caller list
• 50 entries or 30 entries (depending on the system equipment)
• The caller list includes missed calls and also calls in cases where the subscriber’s own phone
is busy.
• Entries on the list cannot be added to other menus.
Local redial list
• 30 entries
• Entries on the list can be added to other menus (e.g., VIP list).
System redial list
• 50 entries or 30 entries (depending on the system equipment)
• Entries on the list cannot be added to other menus.
Editing local lists
The following options are available when editing the redial list and caller list:
To Next Page
Loading...
