Mitsubishi Electric FX3U SERIES - Page 199

11 Batch Data Positioning Mode - TBL Instruction
11.4 Built-in Positioning Parameter Setting
B - 155
A
Common Items
B
Built-in Positioning Functions
Apx.
Example Connection
FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
2 Set the memory capacity.
Click on the «Memory Capacity» tab, and then click on the "Positioning Instruction Settings" check
box to enter check the box.
9,000 steps are needed to set the built-in positioning data. If there is not enough capacity for
programming, set the "Memory capacity" to 16,000 steps or more.
*1. The initial value is 8000 steps in the FX3G/FX3GC PLC.
*2. Only available for
FX3U and FX3UC PLCs.
*3. Only available for FX
3UC-32MT-LT-2 PLC.
Setting item Description of setting Setting range
Memory Capacity
Set the capacity of the program memory. Initial value: 16000
*1
Refer to the
programming
manual.
Comment Capacity
Set the capacity for the comments to be stored in the PLC. Initial
value: 0
Device comment: 50 points/block (500 steps)
File Register Capacity
Set the capacity for the file registers. Initial value: 0
File registers: 500 points/block (500 steps)
Program Capacity
Displays the number of steps that can be used for the sequence
program.
Special Function Memory
Capacity
Set whether "Special Function Block Settings",
"Positioning Instruction Settings", "Built-in CC-Link/LT Settings"
should be enabled.
-
Special Function Block
Settings
*2
Check the box to enable the special function unit/block initial data
setting function. Use the «Special Function Block» tab to set the
initial value of a special block.
-
Positioning Instruction
Settings
Check the box to enable the TBL (FNC152) instruction setting
function. Use the «Positioning» tab to set the built-in positioning
data.
-
Built-in CC-Link/LT
Settings
*3
Check the box to enable the built-in CC-Link/LT setting function. Use
the «Special Function Block» tab to set the built-in CC-Link/LT data.
-
Check the box.
*1
Downloaded from ManualsNet.com search engine