11 Batch Data Positioning Mode - TBL Instruction
11.4 Built-in Positioning Parameter Setting
B - 159
A
Common Items
B
Built-in
Positioning
Functions
Apx.
Example
Connection
FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
4 Transfer the parameters (+ sequence program) to the PLC.
1. Select "Online" from the tool menu, and then select "Write to PLC". The online data
operation screen will appear.
2. Enter a check in the "Parameter" check box, and then click the "Execute" button.
The selected parameter data will be transferred to the PLC. When the PLC is started (enters the RUN mode),
the transferred parameter data will be enabled.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
