Mitsubishi Electric FX3U SERIES - Page 92

FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
4 Before Programming
4.1 List of Related Devices
B - 48
*1. Y002 is not available in FX3G PLC (14-point and 24-point type) and FX3S/FX3GC PLC.
*2. Y003 is available only when two high-speed output special adapters are connected to the FX
3U PLC.
*3. Only available for FX
3UC PLC Ver. 2.20 or later and FX3S/FX3G/FX3GC/FX3U PLC.
*4. Cleared when PLC switches from RUN to STOP.
*5. Only available for FX
3UC PLC Ver. 1.30 or later and FX3U PLC.
*6. Only available for FX
3U/FX3UC PLC.
*7. For the user interrupt input command, the logical NOT function will not be activated.
*8. Only available for FX
3UC PLC Ver. 2.20 or later and FX3U PLC.
M8460 M8461 M8462 M8463
User interrupt input command
*4,*8
Drivable DVIT
Subsection
4.3.7
M8464 M8465 M8466 M8467
CLEAR signal device specification
function enable
*3,*4
Drivable DSZR,ZRN
Subsection
4.3.4
Device number
Function Attribute
Corresponding
instructions
Refer to
Y000 Y001
Y002
*1
Y003
*2
Downloaded from ManualsNet.com search engine