Mitsubishi Electric MELFA CR800-D Series - Cr750-D;Cr751-Dcontroller

17
6.1.2. CR750-D/CR751-D controller
Remove one interface cover of the option slots two in the robot controller rear, and mount the CC-Link
interface card there. Please use the handle of the interface card at mounting of the interface card.
Figure 6.1-2 Mounting of the CC-Link interface card (CR750-D/CR751-D controller)
接続
コネクタ
取っ手
取外しレバー
（下側）
SLOT1
インタフェースカバー
取外し
レバー
SLOT
2
インタフェース
カバー
インタフェース
カード
<CR750-D controller rear>
<CR751-D controller front>
Interface cover
removal lever
Interface cover
Connector
Interface card
Handle
Removal lever (Other side)