Mitsubishi Electric MELFA CR800-D Series - CC-Link Communication Cable Wiring of Two or more Set Connection

24
6.2.4. CC-Link communication cable wiring of two or more set connection
If two or more slave stations connected, prepare one more CC-Link cable connected to the
one-touch connector, and connect as shown in the following
Figure 6.2-2 The example of one-touch connector connection for two or more station connection
Figure 6.2-3 The example of CC-Link cable connection for two or more station connection
Terminat
CC-Link
Shield
CC-Link
DA
DB
DG
SLD
リモート
I/O
Shield
DA
DB
DG
SLD
Terminator
master
-station side
Interface card
Remote I/O station