132
(2) Interrupt settings
The following is a setting example.
Project window [Parameter] [Network Parameter] [Ethernet/CC IE Field] Select
"Ethernet" under "Network Type". button
*1 Do not set the same interrupt (SI) numbers as those to be set for an interrupt of other communications using a fixed
buffer or the RECV instruction.
Interrupt (SI) numbers can be assigned by the user to receive up to 16 communications using a fixed buffer and
communications using the RECV instruction in an interrupt program. The user must manage the interrupt (SI) numbers
assigned for receiving data.
Item Description Setting range
Input Format The input format of each data is decimal number only.
Device Code Select a device code. Select "Fixed Buffer" in this setting. Fixed Buffer
Channel No./Connection No.
Set the connection number of the fixed buffer to trigger the
interrupt program.
1 to 16
Interrupt (SI) No.
Set the interrupt control number for the E71 for when an interrupt
request is issued from the E71 to the CPU module.
*1
0 to 15
To Next Page
Loading...
