14
Pages describing instructions are organized as shown below.
The following illustration is for explanation purpose only, and should not be referred to as an actual documentation.
• Instructions can be executed under the following conditions.
• The following devices can be used.
*1 For bit data, a bit-specified word device can be used. For example, is used for the bit
specification of a word device. (The bit number is specified in hexadecimal.)
For example, the bit 10 of D0 is specified by . However, bit specification cannot be used for timer (T), retentive
timer (ST), and counter (C).
Any time During on On the rising edge During off On the falling edge
No symbol
Internal device
File register
Constant
Bit
*1
Word K, H $
X, Y, M, L, F, V, B T, ST, C, D, W R, ZR K, H $
Descriptions
of setting data
and data type
Instruction
name
Structure of the instruction
in the ladder mode
A device with is
applicable to
the instruction.
Execution condition of the instruction
Setting side
User: A device value is set by the user.
System: A device value is set
by the CPU module.
Word device.Bit No.
D0.A
To Next Page
Loading...
