Mitsubishi Electric MELSEC-L Series - Page 290

288
C0F8
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C100
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C101
H
A response could not be received from the DNS client.
• Check the address of the DNS server.
• Check if communications with the DNS server can be
performed using the PING command.
• Check if the IP addresses of the own station and the DNS
server belong to the same class. (If they belong to
different classes, check the router setting.)
C102
H
A response from the SMTP layer could not be received.
• Check if the SMTP server name has been registered in
the DNS.
• Delete the SMTP server name and change the setting to
the IP address setting. Then check the operation.
• Check if communications with the SMTP server can be
performed using the PING command.
C103
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C104
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
Error code Error description Action