Mitsubishi Electric MELSEC-L Series - Page 294

292
C135
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C136
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C137
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C138
H
The SMTP server is in process, and an error response was
received. (Mailbox not found)
• Check if the mail address of the Ethernet module has
been correctly set.
C139
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C13A
H
The SMTP server is in process, and an error response was
received. (Exceeded the allocation of the memory area)
• Check the status of the SMTP server.
C13B
H
The SMTP server is in process, and an error response was
received. (Illegal mailbox name)
• Check if the mail address of the Ethernet module has
been correctly set.
Error code Error description Action