336
*1 For the E71, the number of connections for the open process from the CPU module has increased to 16 connections.
*2 Compatible with the I/O signal and QE71(N) buffer memory
*3 Data of up to 960 words can be read from/written to an E71, and up to 480 words in a QE71(N).
*4 Availability depends on the CPU module and programming tool version.
*5 This applies to a module with the software version of Q or earlier.
*6 No EEPROM is installed. Items registered in the EEPROM of a QE71(N) are set using the parameter settings of the
programming tool.
*7 This applies to a module with the software version of E or later.
*8 If the E71 cannot communicate data when combined with a certain connected device, the setting can be changed in the
buffer memory (address: 1E
H
). ( Page 35, Section 3.5.2)
After changing the setting, execute the reinitialization process.
*9 Availability depends on the E71 and a programming tool version ( Page 310, Appendix 3).
To Next Page
Loading...
