Mitsubishi Electric R60AD8-G - Page 254

252
10 FUNCTIONS
10.1 SIL2 Mode
Creating a new project (SIL2 Process CPU side)
Create a new project with the SIL2 Process CPU, and add necessary modules.
1. Create a project with the SIL2 Process CPU.
[Project]  [New]
2. Add the user "Administrators" to the project and log on to the system.
3. Initialize the SIL2 Process CPU (built-in memory and user information) of the both systems.
4. Depending on the system configuration, add the R6PSFM and R6RFM.
[Navigation window]  [Module Configuration]  [Element Selection window]  [CPU Extension]
5. Depending on the system configuration, add the RJ71GF11-T2(MR) or RJ71GF11-T2(LR) as a master station.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]