MLR FX412 - Select the Full Screen or Window Mode; Selection of Waypoint Names on Plotter Display

FX312 & FX412 VERSION 2.0
MLR ELECTRONIQUE
28
5.2. – SELECT THE FULL SCREEN OR WINDOW MODE
From the PLOTTER function, press the Menu key and press key 1 (or select 1 - SCREEN MODE
and press Enter ). Select the desired mode using the arrow keys and press Enter .
5.3. – SELECTION OF WAYPOINT NAMES ON PLOTTER DISPLAY
From the PLOTTER function, press the Menu key and press key 2 (or select 2-DISPLAY WPT
and press Enter ). Select the type of display required (i.e. Icon or full name) using the
arrow keys then press Enter .