40
BAUD = Data transmission speed of the DGPS station. (rate transmitted to the DF300).
MODE = Working Mode of the FX312 (Normal, Diff and Auto)
NORMAL = Calculation of the position will take place without differential corrections but if
differential corrections are found they will be applied.
DIFF = Calculation of the position with differential corrections, if the differential signal is not
found the position is not calculated.
AUTO = The FX312 selects the best mode, either Normal or Diff, according to the differential
corrections being received.
FREQ.R = DGPS frequency that the DF300 receives and operates on.
To Next Page
Loading...
