Section 2 --- Driving & Safety
Cayman 2005
78
• Refer to the Tire Chart (Tire size 295/80R22.5) Use the highest actual weight, Scale A or
C, line 2. Example 5000 lbs. Determine the proper tire pressure for each tire using the
Load Inflation chart. Example: 80 psi or stamped on the sidewall of the tire.
• Repeat above procedures to determine REAR axle Scale B and D, tire pressures.
WARNING:
Improperly inflated or overloaded tires can cause a blowout. An overloaded axle can
cause a component failure of the suspension system. Tire blowout or broken suspen-
sion components can lead to loss of vehicle control resulting in property damage, per-
sonal injury or death.
CAUTION:
If actual weight carried by any tire is below the tire chart weight specification mini-
mum tire pressure the minimum inflation pressure must be maintained. Tire pressure
below the minimum inflation pressure can overheat and damage the tire casing lead-
ing to premature tire failure or blowout.
6,500 6,500 13,000
5,000 4,000 9,000 13,000 4,000
10,000 10,000 20,000
7,100 6,900 14,000 20,000 6,000
23,000 33,000 10,000
020255K
To Next Page
Loading...
