Monarch 9855 - Index

INDEX
A
about fonts.................................. 8-8
accessories.................................B-1
adjusting
backfeed distance................... 4-13
cut position ............................ 4-12
dispense position ................... 4-12
margin position....................... 4-11
print position............................ 4-8
supply position ....................... 4-10
supply width........................... 2-16
B
backfeed..................................... 4-7
batch
repeating ................................. 8-6
restarting................................. 8-3
baud rate
options .................................... 5-2
baud rate .................................... 5-1
C
cancel
paused batch ........................... 8-4
checking
print ...................................... 10-2
software................................. 10-1
cleaning printer ........................... 9-1
clearing jams............................... 9-1
common
errors .................................... 10-8
communication
errors .................................... 10-7
communication parameters
baud rate ................................. 5-1
parity....................................... 5-1
start (XON) character................ 5-1
stop (XOFF) character .............. 5-1
stop bits .................................. 5-1
word length.............................. 5-1
communications
parallel.................................... 5-5
contrast
setting................................... 4-20
currency ..................................... 6-3
cut
position ................................. 4-12
D
default
port settings...................... 5-1, 5-5
values .............................. 5-1, 5-5
dispense
position ................................. 4-12
distance
backfeed................................ 4-13
documentation
ordering................................... 1-5
E
emulating 9445............................ 1-5
error label
printing.................................... 8-2
errors
common................................. 10-8
communication ....................... 10-7
summary................................ 10-7
Ethernet...................................... 0-3
exiting an option.......................... 1-9
F
flash
memory ................................... 6-7
flow control
options .................................... 5-4
function
selecting.................................. 1-8
H
high energy ribbon....................... 3-4
Index 1