3. Press or until you see the option you want. Then press
Enter/Pause. Press Escape/Clear until you see the Main Menu.
Setting the Power-Up Mode
Power-up mode lets you decide how your printer starts each time you turn it
on. If you want the printer to be ready to start printing when it is turned on,
use the Online power-up mode. If you want the operator to perform some
other task first, use the Offline power-up mode.
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
1. Press or until you see
DEFAULTS
Powerup Mode
2. Press Enter/Pause. The current setting is displayed, for example:
POWER UP MODE
Online
3. Press or until you see the option you want. Then press
Enter/Pause. Press Escape/Clear until you see the Main menu.
Changing the Prompt Set
Prompt set determines which language displays on the printer's menu. You
can select English, French, German, Spanish-ES, Japanese, Portuguese,
Italian, Swedish, Spanish 2, Danish, Dutch, Finnish, and Norwegian. Some
prompts may remain in English, even if you select a different language.
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
1. Press until you see
DEFAULTS
Prompt Set
6-6 Operator's Handbook
To Next Page
Loading...
