Monarch 9855 - Setting Supply Options

4
SETTING SUPPLY OPTIONS
This chapter explains how to select the supply type, ribbon, speed,
feed mode, backfeed, print position, supply position, margin position, cut
position, dispense position, backfeed distance, separators, and skip index
mode. This chapter also explains how to adjust the print contrast and enable
the verifier.
Main Menu
Cancel All Print Mode Batch
Entry
Repeat
Batch
Batch
Options
Setup Scripts Diagnostics
Supply Contrast Defaults Network
Port
Settings
Flash
Memory Verifier RFID
Supply
Type
Ribbon Speed Feed Mode Backfeed Positioning Separators Skip
Index
Knife
Ctrl
Error
Action
Your System Administrator may limit access to this menu to prevent supply,
network, script, or communication settings from being changed. If password
protection is turned on, you see
Enter Password
_ _ _ _ _ _
when you try to access the setup menu. Get the password from your System
Administrator to continue.
Setting Supply Options 4-1