SETTING DEFAULTS
This chapter explains how to select the monetary sign, secondary
sign, decimal places, slashed zero, power-up mode, prompt set, imaging
errors, and ignore configuration packets. This chapter also explains how to
format flash, check the available flash memory, and pack flash memory.
Main Menu
Cancel All Print Mode Batch
Entry
Repeat
Batch
Batch
Options
Setup Scripts Diagnostics
Supply
Contrast
Defaults
Network
Port
Settings
Flash
Memory
Verifier
RFID
Monetary
Sign
Secondary
Sign
Decimal
Places
Slashed
Zero
Power-up
Mode
Prompt
Set
Flash
Storage
No Image
Error
Ignore
Config
6
You can set your printer configurations to fit your daily operation, using
either the offline menus or the online configuration option. After an option is
selected in the online configuration or offline Setup Menu, the option is
saved when the printer is turned off.
Setting Defaults 6-1
To Next Page
Loading...
