Using Flash Memory
The flash memory options are listed in the table below.
Option Choices Default
Format Flash No/Yes No
Unused Flash NA NA
Pack Flash No/Yes No
Formatting Flash Memory
Before storing packets in flash memory, downloading a script, or if the
printer's firmware is updated, you must format the flash memory.
Formatting flash memory is only required once during initial printer
setup.
Note: When you format flash memory, the script and any downloaded
TrueType® fonts saved in the printer's flash memory are deleted and
must be resent to the printer.
To format flash memory, from the Main Menu, select Setup. Then, follow
these steps.
1. Press or until you see
SETUP
Flash Memory
2. Press Enter/Pause.
FLASH MEMORY
Format Flash
3. Press Enter/Pause.
Are you sure?
No
4. Press to display "Yes" and press Enter/Pause.
CREATING FLASH
FILE SYSTEM 1
6-10 Operator's Handbook
To Next Page
Loading...
